MENU

Category

Poolstore.vn Gò Vấp

  • Hotline 01
  • Hotline 02
  • Poolstore.vn Bình Thạnh

  • Hotline 01
  • Hotline 02
  • Construction and installation quotation

  • Hotline 01
  • Hotline 02
  • Video

    How To Measure Your In Ground Pool For A Safety Cover

    Safety covers come in all shapes and sizes. If your swimming pool is not a “standard” rectangular shape, you will likely need to measure your pool for a custom safety cover. While this may seem like a daunting task, it’s a lot easier than it seems at first glance.

    Step 1

    Draw a sketch of the pool shape on the grid provided on the measurement form. To represent your A-B line, mark 2 points on the deck in a straight line approximately 4 feet from the edge of the pool and about two-third’s (2/3) the length of the pool. “A” must always be to the left of “B” as you face the pool. Make sure the pool is totally in front of the A-B line. This is a must because your measurements will be incorrect if this instruction is not observed.

    Step 2

    Measure the A-B line, and on your sketch, note its length and position in reference to the pool. Use chalk to mark and number points clockwise around the entire pool at approximately 3 foot intervals. Point #1 must be directly across from the center point of your A-B line.

    Step 3

    Measure sharp curves and angles at 1’ to 2’ intervals or less. Any obstructions such as ladders, slides, rocks, waterfalls, etc. should be a numbered point. Measure these last after complete all pool points. Any obstructions away from the water’s edge but within the 18” overlap area should be numbered last on the A-B form, not in succession as you measure around the pool’s edge. Be sure to include any steps, ladders, waterfalls or any other non-removable obstruction in your sketch.

    Step 4

    Record measurements from point A and B to all the points you have marked around pool perimeter. Secure the end of your 100 ft. measuring tape to “A” on your A-B line and measure the distance to point #1 and note the distance in the “A” column on the chart provided.

    Step 5

    Continue around the pool until you have recorded all your points with an “A” measurement. Repeat the process to obtain the B measurements and record your readings in the B column on the measurement form.

    Step 6

    Once you have completed bot A and B measurements, take 3-4 diagonal measurements randomly from numbered points on the pool and note in the spaces provided.

    Step 7

    Once you have the form filled out, 02835880123 for a free quote.

    Related news

    0909 273 179

    0
    Rất thích suy nghĩ của bạn, hãy bình luận.x
    ()
    x