User manual:
When the pool is filled with water, settling down the solids and exotic things down the lake is a necessity for cleaning and directing the sewer. It should be used when the recirculation filter system is used by sand filter. The process is as follows:
- Adjust the total alkalinity of the water at 100 ppm
- Turn off the filter system.
- Spread over the surface of the lake with a dose of about 120 grams of chemicals to empty for each 4,500 liters of water.
- Leave it alone for 12 hours and then drain the tank – directly into the discharge.
- For the filter system to operate again within 24 hours.
- As soon as this process is complete, total alkalinity and pH should be adjusted.
- Then use chlorine twice daily.